GE IS210WSVOH1AE Servo Valve Control Module (WSVO) Mark VIe Turbine Control
- Product Code: IS210WSVOH1AE
- Availability: In Stock
GE IS210WSVOH1AE Servo Valve Control Module (WSVO) Mark VIe Turbine Control
Manufacturer: GE Vernova (GE Power Speedtronic Turbine Controls)
Model: IS210WSVOH1AE WSVO Servo Loop I/O Card
Compatible Platform: GE Mark VIe / Mark VIeS gas/steam/combined-cycle turbine control racks (TMR triple modular redundancy support)
Type: Single-slot VME hot-swappable plug-in servo control daughter board, built-in large aluminum heat sink
Core Function: 4-channel 4–20mA servo valve drive output + 4-channel LVDT/RVDT position feedback analog input + 6 isolated discrete DI; hardware PID closed-loop regulation, full channel fault diagnostics, safety interlock trigger for turbine critical actuators (fuel valve, IGV, exhaust steam valve)
1. Product Overview
IS210WSVOH1AE is the dedicated WSVO servo control card for GE Mark VIe turbine control system, installed in standard VME rack single slot, powered by rack redundant 24VDC backplane.
Equipped with high-power heat sink for long-term continuous servo drive operation, 18-bit DAC for current output and 18-bit ADC for position feedback achieve ultra-high closed-loop control precision, critical for turbine fuel flow and air intake regulation to guarantee unit power stability under rapid load fluctuation.
All analog channels adopt 2000VAC galvanic isolation to eliminate ground loop interference in high EMI power plant cabinets. Built-in multi-layer hardware protection: overcurrent, short-circuit, open feedback, output overrange, with millisecond-level fault timestamp logging uploaded to HMI/SCADA.
Configured and calibrated via GE ToolboxST software, supports hot swap without system shutdown, widely used in combined-cycle power plant gas turbine main control racks. GE discontinued new production, only surplus new stock and refurbished replacement spare parts available in aftermarket.
2. Complete Technical Specifications
• Channel Layout: 4×4–20mA servo drive AO, 4×LVDT/RVDT analog AI feedback, 6×opto-isolated dry contact DI
• Drive Output Accuracy: ±0.1% full scale, max load impedance ≤500Ω per channel
• Sampling Resolution: 18-bit ADC (feedback), 18-bit DAC (servo drive)
• Closed-loop Response Time: ≤5ms hardware PID loop
• Galvanic Isolation: 2000VAC RMS per analog channel, opto-isolation for DI
• Power Supply: Redundant +24VDC backplane, max power consumption 8.5W
• Operating Temperature: -30℃ ~ +70℃ ventilated turbine control cabinet
• Environmental Rating: Conformal coated PCB, IP20 (cabinet installation only)
• Mechanical Size: 146mm H × 98mm W × 220mm D, weight ~0.6kg
• Hot Swap: Supported, no rack power off required for replacement
• Certifications: GE turbine safety standard, CE industrial compliance, UL508
3. Hardware Composition
1. Large aluminum fin heat sink for power drive circuit heat dissipation
2. 4-channel high-current servo drive output circuit with surge suppression
3. LVDT/RVDT signal conditioning & 18-bit synchronous ADC sampling circuit
4. 6-channel optocoupler isolated digital input acquisition circuit
5. VME backplane gold-plated connector for communication with Mark VIe CPU controller
6. Front panel status LED array: RUN, FAULT, COMM, servo channel alarm indicators
4. Differentiation With Other GE Series Boards
• IS210WSVOH1AE: Mark VIe servo valve dedicated closed-loop control card (actuator drive + position feedback)
• DS200DSPCH1ADA / DS200RTBAG2AFB: Mark V old generation turbine control boards, incompatible with Mark VIe rack
• IC693CPU372 / IC693CMM301: Series 90-30 PLC automation modules, not turbine servo control hardware
• UR6EV / UR8FV: UR series substation protection I/O & analog cards, power system relay protection only
5. Core Turbine Application Scenarios
• Combined-cycle gas turbine main control: Fuel gas servo valve precise position closed-loop adjustment
• Gas turbine inlet guide vane (IGV) hydraulic actuator position control
• Steam turbine main steam / exhaust bypass servo valve regulation
• Heavy industry cogeneration unit turbine critical actuator high-precision servo loop control
GE Vernova © IS210WSVOH1AE WSVO Servo Valve Control Module Mark VIe Speedtronic Turbine Control System